StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Health Safety and Welfare - Report Example

Cite this document
Summary
The report "Health Safety and Welfare" discusses the mechanical hoisting of components on-site, which is a procedure that is fraught with risk and possibilities of accidents and hazards. It presents essential principles and procedures of risk assessment to govern all lifting and hoisting operations…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.4% of users find it useful
Health Safety and Welfare
Read Text Preview

Extract of sample "Health Safety and Welfare"

Unit 6 Health Safety and Welfare. 4 Mechanical Hoisting of components on site is a procedure that is fraught with risk and possibilities of accidents and hazards. a) The essential principles and procedures of risk assessment that should govern all lifting and hoisting operations on a construction site are: Planning: A lift and hoist plan, including Hazard identification and assessment of risk, method, and resources, both material and human, required to successfully complete a lift. Control: A Person in Charge, heading the lift team, with a clear hierarchy of communication and responsibility. Competence: Involvement of trained and competence persons only. Equipment: shall be tested and shall have safety devices installed. Inspection and certification: All equipment shall be inspected and logs shall be maintained. Lifting of personnel: shall be as the last resort, to the lowest height reasonably possible as per provisions in the overall lift plan. b) Practices employed to minimise hazards: Preparation of a comprehensive safety, health and welfare file for the project. A total risk assessment programme prepared and vetted by the CDM coordinator, with a special section outlining best practices (as mentioned in the next section) and relevant legal references as a part of it. Training and indoctrination of all personnel involved in specialized jobs in the project, with a competency review before starting work. Only trained personnel shall operate the hoist mechanism. All changes and modifications to the equipment’s specifications shall be performed by the manufacturer’s representative only. All new hoisting equipment shall be inspected periodically and certified prior to use, as also after any modification or alteration, and the certifying authority shall sign off on the successful certification. Any unsafe situation revealed as a result of the inspection shall be rectified before equipment is used. Hoist operator shall necessarily inspect the equipment manually every time before using it. Isolation of all electrical cables and wires from worksite. c) Safety Practices related to hoisting plants are: Defining the load path (orientation and path of the items movement and location of setting down) Choosing correctly rated lift equipment. Carrying loads over people should be avoided. Identification of load characteristics to correctly foresee load behavior. Considerations including load dimensions, configurations and attachments. Ensure correct use of rope-clips and properly fitted pins. Minimise the swing of a hook, to reduce chance of accident. Load should be balanced and secured in the sling before lifting more than a few centimeters. Dynamometers should be used for weight indication only. All safety devices and procedures should be installed, including lights, guard rails, proximity warnings etc. The area around lift should be kept clear. Rope should be checked after every lift for wear and tear. Hardhats should be worn at all times. Hoisting of components should be avoided after dark, as the complete aerial path may not be sufficiently illuminated, causing injuries. All fall equipment should be inspected before use. Operating parameters for operating in winds should never be violated. Loads should be kept balanced while in a basket hitch so as to prevent slipping. Loads should never be left unattended. 4.2 Working in confined spaces requires conforming to requirements and legal provisions to reduce hazards specific to such working conditions. Confined spaces may include storage tanks, silos, reaction vessels, enclosed drains, sewers, ducts, poorly ventilated and dark rooms etc. The types of dangers in confined spaces are: Oxygen deprivation. Poisonous gases or fumes. Liquids and solids that can fill the space suddenly, like grain in a silo. Fire and/or explosions. Residue left in tanks that can give off vapours or poisonous gases. Asphyxiation due to suspended dust. Temperature extremes. The conditions outlined above may not originally be there, but may happen during work being carried out. These situations may include grinders giving off dust, welding causing fumes, or escape becoming difficult due to equipment already installed within the space, making escape in case of an emergency difficult. Risk assessment includes: The work. The working environment. Equipment and tools. Competence of workers. Availability of emergency backup if required. In case of confined spaces, steps to be taken towards hazard mitigation are: Avoiding entry into and working within confined spaces. Modify the space so as to make it less confined. Work can be carried out without entering the space. Use of remote-operated equipment. Following of best practices to achieve health and safety, including Appointing of a responsible person in charge of all work to be undertaken in the confined space. Checking of the competency and validity of the training of the people who are to work. Mechanical and electrical equipment should be isolated to prevent leakage. Cleaning and checking for any residue before commencing work. Check viability of exits in case of emergency. Ventilation. Provision of special non-sparking tools and lighting (below 25 V equipment). Providing breathing apparatus to workers in the space. Access to 24 hour emergency services. Rescue and safety harnesses to be deployed at all times. 2-way radio communicators that can function in water should be provided to all workers. Homing devices should be issued in rare cases, like mines. Some relevant laws that refer to and provide guidelines for working in confined spaces are: The Confined Spaces Regulations 1997; The Management of Health and Safety at Work Regulations 1999; The Control of Substances Hazardous to Health Regulations 2002 (as amended); The Personal Protective Equipment at Work Regulations 1992 (as amended); The Provision and Use of Work Equipment Regulations 1998; Electricity at Work Regulations 1989; Workplace (Health, Safety and Welfare) Regulations 1992. (HSE leaflet INDG258) 4.3 a) Risk assessments that require specialist knowledge. In terms of a construction project, different levels of skill are required to carry out different complexities of tasks. This hierarchy of complexities extend to risk assessment as well as subsequent mitigation as well. In large and complex projects, the CDM coordinator himself has to have the relevant skills and experience to judge where professionals and experts with specialized knowledge would need to be called in to assess the possible vulnerabilities of a particular task, and to help in reducing risks associated with it. For example, electrical risks, mining risks, financial risks in large projects, all require experts in those fields to help the project steer through the potential problems caused by lapses. Specialist knowledge allows these experts to design the risk management procedures to specifically deal potential problems in tasks related to their fields. It also recommended to have these experts on board while these tasks are being carried out, to make sure of the best decision making capabilities in the field if required in times of emergency. b) Hazardous substances are dealt with methods of risk assessment and risk control, with training to workers who may be exposed to such hazardous substances. Risk Assessment: The nature and type of hazardous substances. Degree of possible exposure to thesw substances Resultant seriousness of impact on health and safety. Measures to control transport, storage and use of these substances, as also to control exposure to them. Overall surveillance to oversee compliance to best practices. Training to staff. Risk Control: Stopping use of the substance in current form in current way. Using of a substitute substance if possible. Engineering controls to as to mitigate occurance of conditions that may cause hazard. Adopting safe systems on project site to minimise risk. Use of protective equipment by all staff. Staff Training: Assessment of risk and information dissemination on these risks. Detailed study of project site. Competency checking of all involved. Training on use and maintenance of Personal Protective equipment. c) Management practices to minimise hazards give a holistic view regarding attitude towards risk management rather than micro-measures, as discussed in outcome 4.1. Hazards in Construction are of three basic types; Chemical, Physical and Ergonomic. Control measures at management level to mitigate risks and minimise hazards are: Hiring of a competent CDM coordinator. Preparation of a health and Safety file that is constantly updated. Comprehensive, honest and transparent risk assessment, with feedback from relevant authorities. Project Benchmarking. Intense and relevant training of involved personnel. Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(Health Safety and Welfare Report Example | Topics and Well Written Essays - 1250 words, n.d.)
Health Safety and Welfare Report Example | Topics and Well Written Essays - 1250 words. https://studentshare.org/technology/1555008-health-and-safety-4
(Health Safety and Welfare Report Example | Topics and Well Written Essays - 1250 Words)
Health Safety and Welfare Report Example | Topics and Well Written Essays - 1250 Words. https://studentshare.org/technology/1555008-health-and-safety-4.
“Health Safety and Welfare Report Example | Topics and Well Written Essays - 1250 Words”. https://studentshare.org/technology/1555008-health-and-safety-4.
  • Cited: 0 times

CHECK THESE SAMPLES OF Health Safety and Welfare

Workplace Health, Safety & Welfare

This paper is about workplace health, safety and welfare on the working place.... They are a broad discipline that deals with protecting the health, safety and welfare of those engaged in an employment or work.... The agency for safety in places of work in the Europe asserts that the workplace health, safety and welfare regulations entail a broad range of basic issues of health, safety and welfare and is applicable to majority of workplaces....
4 Pages (1000 words) Coursework

Health Safety in the UK

HSC makes arrangements to secure the health, safety and welfare of people at work, and the public, in the matters of making new law and conducting inquiries.... hellip; According to HSE(Health and safety Executive) statistics modern UK has 4 million enterprises in the UK, of which over 99% were classified as small (having less than 50 employees) and just 0.... HSE statistics2007) All this has contributed to an overall shift to the working and safety patterns in Britain as there has been a massive increase in temporary, agency and contract working, together with an inflow of migrant workers both from within and outside the EU....
15 Pages (3750 words) Essay

Health and Safety at Work etc Act 1974 -UK

The aims of the Commission and the Executive, whose existence and functions derive from the 1974 Act, are to protect the health, safety and welfare of employees and to safeguard others, principally the public, who may be exposed to risks from work activities.... The Act was intended: - To make further provision for securing the health, safety and welfare of persons at work; - To protect others against risks to health or safety in connection with the activities of persons at work; - To control the keeping and use and prevent the unlawful acquisition, possession and use of dangerous substances....
2 Pages (500 words) Essay

Health, Safety and Welfare for Construction and the Built Environment

It provides all possible and probable hazards so safety supervisors do not need to think a lot during questioning.... Their main duty is to identify the likely chances of hazards occurring.... We urge them to take a cue from the department of labour to check if there are any poisonous elements within the… We also urge the supervisor to identify if there is any equipment that has malfunctioned as well as to identify other likely causes of hazard and their degree of severity....
7 Pages (1750 words) Essay

Management Essentials for Health and Safety

The research question can be constructed as: The Robens report that was focused on “safety and Health at Work” and was published in the year June 1972 formed the foundation ground for much of the knowledge about Health and Safety legislation.... The paper attempts at critically examining the impacts of the Robins recommendations and their relevance and management of health and safety in the 21st century.... The research question is “Are the recommendations of the Robens report sufficient to address the health and safety of workers?...
13 Pages (3250 words) Coursework

Health and Safety Management at the University of Lancashire

All the workplace health and safety requirement issues in construction sites are embodied in The Construction (Design and Management) Regulations 2007 Number 320 along with the Construction (Health, Safety, and welfare) Regulations 1996 (CHSW).... In general, the Construction (Health, Safety, and welfare) Regulations 1996 aimed to protect the health, safety, and welfare of individuals that are directly or indirectly affected by any construction works....
8 Pages (2000 words) Case Study

Benefits of Height Regulation on Health Safety and Welfare of Workers in the Construction Industry

… The paper "Benefits of Height Regulation on Health Safety and Welfare of Workers in the Construction Industry" is a good example of a term paper on social science.... nbsp;Work at height is a major risk to the Health Safety and Welfare of workers in the UK and other parts of the world.... The paper "Benefits of Height Regulation on Health Safety and Welfare of Workers in the Construction Industry" is a good example of a term paper on social science....
9 Pages (2250 words) Term Paper

Main Health Safety and Welfare Legislation in Construction

… The paper "Main Health Safety and Welfare Legislation in Construction" is a perfect example of aa term paper on the law.... The paper "Main Health Safety and Welfare Legislation in Construction" is a perfect example of aa term paper on the law.... For instance, in the project of Swansea high street redevelopment health, safety and welfare regulation are very significant and failure to adhere to any of them is a serious crime punishable by a fine or a jail term (Perry 2008, p....
7 Pages (1750 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us