StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Fluid Dynamics of Fire - Assignment Example

Cite this document
Summary
This assignment "Fluid Dynamics of Fire" presents the following issue: increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high-energy collisions. It is only these collisions that result in a reaction…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91.1% of users find it useful

Extract of sample "Fluid Dynamics of Fire"

Area of a circle = πr2 = 5.76R2 = 5.76/π = 1.83 = r = 1.35The critical diameter is 1.35 + 1.35 = 3.0 mQuestion 2Lower flammability limits of mixtures of combustible gases can be calculated using Le Chatelier's mixing rule for combustible volumeLm = 100/(x1/L1 + x2/L2 + . xn/Ln) %( vol)Where:Lm = upper/lower flammability limit of the gas mixtureLi = upper/lower flammability limit of component iXi = concentration of component I in the gas mixtureMixed fuel is composed of methane (volume percent is 0.35), carbon monoxide (0.35), and hydrogen (0.30)Lm =100/ (35/4.

4 + 35/12 + 30/4) = 100/ (7.95 + 2.92 + 7.5) = 18.37 is the lower flammable limit of the concentration.Question 3Question 4Infrared thermal radiation = 1015Hz, BBC radio 92.8 MHzBBC = 92.8 x 1000 = 92800HzSpeed of sound = 344m/sThe wavelength of the thermal radiation = speed of sound in the air/frequency=344/ 1015= 0.339mThe wavelength of the BBC radio = 344/92800= 0.004mThe wavelength of thermal radiation is larger than that of BBC radio. This indicates that the higher the frequency the smaller the wavelength.

Question 5Question 6Question 7Question 8The Stefan-Boltzmann Law can be expressed asΕ = 0.85q = ε σ T4 AWhereε = emissivity of the objectAnd 5.6703 10-8 W/m2K4 is the Stefan-Boltzmann Law constantQ= 0.85 x 5.6703 10-8 = 4.82 x 108 W/m2Question 9IUPAC nomenclatureThe formal naming of haloalkanes should follow IUPAC nomenclature, which puts the halogen as a prefix to the alkane. For example, ethane with bromine becomes bromoethane, methane with four chlorine groups becomes carbon tetrachloride.

However, many of these compounds have already an established trivial name, which is endorsed by the IUPAC nomenclature, for example, chloroform (trichloromethane) and methylene chloride (dichloromethane). For unambiguity, this article follows the systematic naming scheme throughout.CFCs have greatly contributed to the depletion of the ozone and this led to their phase out at a given time. The compounds also enhance the greenhouse effect because of high concentrations. Low concentrations of the compounds lead to an increase in their effects in line with their mass.

Question 10Chemical reaction rates of temperatures at three temperatures – 300, 600, and 1200 K. The activation energy is 110 kJ/mole  

Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Fluid Dynamics of Fire Assignment Example | Topics and Well Written Essays - 750 words, n.d.)
Fluid Dynamics of Fire Assignment Example | Topics and Well Written Essays - 750 words. https://studentshare.org/science/2045866-calculation-physcis
(Fluid Dynamics of Fire Assignment Example | Topics and Well Written Essays - 750 Words)
Fluid Dynamics of Fire Assignment Example | Topics and Well Written Essays - 750 Words. https://studentshare.org/science/2045866-calculation-physcis.
“Fluid Dynamics of Fire Assignment Example | Topics and Well Written Essays - 750 Words”. https://studentshare.org/science/2045866-calculation-physcis.
  • Cited: 0 times

CHECK THESE SAMPLES OF Fluid Dynamics of Fire

Development and use of explosives over the past century

This potential energy is released when the substance encounters heat, light, sound, or pressure.... The explosives are dangerous substances that not only take lives of people but also when used in a… The first explosive discovered was black powder.... The black powder was discovered around 13th century although there is no mention as to who or which country actually discovered the existence or the uses of The first record of the usage of it exists dates back to around early 1600s in China (Tanner, 2014)....
11 Pages (2750 words) Essay

Fire Fighting: The National Institute of Standards and Technology and Underwriters Laboratories

NIST and UL have conducted extensive research to understand the dynamics of fire and how it behaves to different fire-ground firefighting techniques.... NIST and UL have conducted extensive research to understand the dynamics of fire and how it behaves to different fire-ground firefighting techniques.... To begin with, it is important to understand the dynamics of fire and its interactions with the environment.... On the other hand, fire dynamics is evaluation of how the science of fire, the chemistry, the material science, fluid mechanics and principles of heat transfer influence the behavior of fire (Gorbett & James , 2011)....
2 Pages (500 words) Essay

Diffusion Flames and Fluid Dynamics of Combustion

fluid dynamics of Combustion3.... … Assuming density of air at the sea level to be 1 kg/m3Putting the values we get48.... 9 X 103 = -1/2 X 1 X 1.... 7 X 0.... 3 X V2V = 300 m/secThus the cruising speed of the aircraft at the sea level is 300 m/sec.... .... Heat Transfer2.... ....
6 Pages (1500 words) Coursework

Mechanics of Fluids, Civil, and Mechanical Engineering

(LO 1) fluid flowsa) Critically discuss the “ventilation parameter” and how it relates (if at all) to the mass flow at the doorway of a fire-compartment, to the neutral plane, and to the thermal discontinuity plane.... The fire plume entrains the gases from the lower cold later to the upper hot layer at a rate me.... In addition, the gas flow in and out of the compartment occurs through entrainment of the fire plume....
7 Pages (1750 words) Assignment

Heat Transfer, Fluid Flows, and Fire Suppression

) The governing equations of a fluid dynamics model are shown below.... 9The out flow of hot gases through the opening and the inflow of cold gases are influenced by fire.... For two phases like water and steam, it is assumed that the rate of increase of mass of the first fluid is equal to the rate at which the mass of the second fluid is decreasing.... Momentum An equation that expresses conservation momentum of a fluid flow isThe term represents the inertia force per unit volume of fluid....
7 Pages (1750 words) Coursework

Solution of Fluid Problems

These two parameters are dependent on the density of the fluid.... he flow expansion rate ()The fluid density (ρ)The velocity of the fluid flow ()The tensor product (Turbulence modelsTurbulent models are vital in calculating the mean of glow directly without following the normal procedure of first considering the flow field that has full time-dependent properties.... It is important to note that a turbulent flow in any given fluid has many varied features on length scales that differ but ultimately interact....
7 Pages (1750 words) Assignment

Fire Protection System

The main types of fire systems that are used in apartment buildings include residential water mist system and residential sprinkler system.... The heat activates the system in the event of fire.... … fire Protection SystemIntroductionFire protection system is required in a building for the purposes of ensuring automatic response to fire is in place.... The fire protection systems are useful in fighting the fire before the arrival of the fire fire Protection SystemIntroductionFire protection system is required in a building for the purposes of ensuring automatic response to fire is in place....
15 Pages (3750 words) Assignment

Implementation of Computational Fluids Dynamics in STARCCM+ Simulation

… Implementation of Computational Fluids dynamics (CFD) in STARCCM+ simulationIntroduction Simulation is a process of imitating real process operations over a given period.... This process enables one to get the actual view of the system without one being Implementation of Computational Fluids dynamics (CFD) in STARCCM+ simulationIntroduction Simulation is a process of imitating real process operations over a given period.... Viscosity: the ability of a fluid to resist flow alongside density its weights per unit weight of water are the distinguishing characteristics of the two fluids....
13 Pages (3250 words) Coursework
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us