StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Construction Technology of the Buncefield Compound - Case Study Example

Cite this document
Summary
The object of analysis for the purpose of this paper "Construction Technology of the Buncefield Compound" is the massive Buncefield oil depot fire on December 14, 2005, which was the biggest of its kind in Europe since the end of World War II…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER98.1% of users find it useful

Extract of sample "Construction Technology of the Buncefield Compound"

RUNNING HEAD: CONSTRUCTION TECHNOLOGY Construction Technology [Name of the Writer] [Name of the Institution] Construction Technology The massive Buncefield oil depot fire on December 14, 2005, was the biggest of its kind in Europe since the end of World War II. The explosion, near the north London suburb of Hemel Hampstead, rocked Hertfordshire and North London and reportedly was heard in France and the Netherlands. The blast at Britain's fifth largest fuel depot was felt as far away as Oxford shire and generated a plume of smoke stretching for 70 miles. While 43 people were injured in the explosion, remarkably, no one was killed. (Williams, 2007 p. 1666-1630) The Complex The Buncefield compound is made up of numerous tank farm and oil storage procedures. Two of these are functioned by HOSL, a joint project between Total and Texaco. Another site is worked by a joint group between Shell and BP, the British Pipeline Agency (BPA), and is located among the HOSL East and West locations. BPA also operates the close by Cherry Tree Farm location and Shell and BP also have their own services on nearby sites. (Williams, 2007 p. 1666-1630) Fuel stuffs were given to the Buncefield terminal by three channels systems. The tenth FinaLine pipeline that ends on the HOSL West site delivered fuel from Lindsay Oil plant on Humberside. Another 10in pipeline ended in BPA’s Cherry Tree Farm location and brought oil from Merseyside through Blisworth in a pipeline recognized as the M/B North. A 14-inch tube from Thameside, which begins through a T-junction near to the site and is recognised as the T/K South, also finished in the BPA main location. (Williams, 2007 p. 1666-1630) Firefighter’s worst nightmare became a truth in December 2005, when an oil depot at Buncefield on fringes of Hemel Hempstead blown up into a tire that fumed for days. The overwhelming event at the Hertfordshire Oil Storage Ltd (HOSL) depot blemish the area permanently, and left engineers questioned how that could had happened. (Boyce, 2008 p. 16) The HOSL facility is permanently damaged, but a BP storage depot just across the boulevard from the shown site is set to resume actions in the coming few months. According to BP, more than 55 alterations have to be passes so that the plant can start again, including an improved tank and control system and fresh high-level alarms on the storage tanks. (Boyce, 2008 p. 16) Its Buncefield depot is of tactical importance. BP requires to hold fuel so that oil stations can react rapidly to increases in order. But have things altered enough to discontinue another blast? Kevin Allars, head of the Health and Safety Executive's Chemical Industries Division, said that the oil and gas storage business has been both liable and fast acting in its answer to the occurrence "Buncefiekl was one torture of a wake-up call," he said. "That type of blast is extremely uncommon, and it is still very doubtful that you would get nothing the conditions creased up to get a vapour cloud. Nevertheless manufacturing has done a substantial amount to improve the satisfactory locations that store a lot of fuel." (Boyce, 2008 p. 16) The "main thing" is the petrol. Other fuels could not generate the vapour cloud that allowed the big explosion at Buncefield. Fuel tank also requires to the big, and to have a high force intake system, so that it can fill up quick enough to generate vapour. The HSE applied these circumstances to the fuel storage locations in the UK, and recognised 50 that were at danger. (Williams, 2007 p. 1666-1630) The number of examinations at these sites was then enlarged, and the essential safety developments for the petrol storage tanks resolute. Improvements to the basic containment communications were completed on 500 fuel storage tanks at the 50 locations within nine months. According to a dogmatic impact assessment freshly carried out by the HSE, the charge of just these developments is £250 million, they integrated installing improved alarms, making gauges more dependable, and upgrading valves. (Williams, 2007 p. 1666-1630) Firms then passed out Levels of Protection Analysis and Safety Integrity Level check to decide the effectiveness of their protection provision including the improvements to the tanks. These evaluations are now being analysed by the HSE to determine if remaining work is necessary. "The vast majority of changes have but there are further changes required by the new containment policy that was devised in the wake of Buncefield. The policy requires secondary and tertiary" containment features, such as bunds and drainage systems, to he upgraded. (Williams, 2007 p. 1666-1630) The Health and Safety Executive's alert comes as a result of information received from the on-going investigation into the Buncefield fuel depot explosion last December, which was caused when a faulty fuel gauge allowed thousands of gallons of petrol to overflow from a storage tank. The HSE has requested that operators of storage facilities for fuel and other hazardous substances carry out immediate checks where TAV level switches manufactured by Cynergy3 Components or its predecessor firms are fixed to their storage tanks. There are thought to be 2,000 of these switches installed at 170 sites worldwide. The HSE confirmed that Cynergy TAV switches had been installed on the overfilled Tank 912 at Buncefield but refused to comment on their relevance to the incident until the official report is published. (Bond, 2005 p. 5921-5926) TAV level switches fitted with changeover (double throw) reed buttons are normally worked in "de-energise" mode to uphold alarm/trip trails in "normal" status. The switches are checked by using a bar or plate fixed to the head of the button, which can be lifted to replicate a high level of fluid in the tank. If the button is working, then alarms and trips linked to the switch should function. This work is longer term, more substantial, and is difficult to cost because it is site specific, That those containment features should also remain redundant is the most important message to engineers Waverley TBS Waverley TBS, alcoholic and soft drinks distributor to over 35,000 outlets, found that the Buncefield explosions had ripped through the its building from the rear loading bay to the front offices, leaving a trail of devastation. (Bond, 2005 p. 5921-5926) Need for common methodology In the description, sites the store and relocate petroleum products on a huge scale are advised to as Buncefield-type location. However, the suggestions could, to some amount, be measured for a broad range of facilities showing to the dangers of fire and blast. One of the total conclusions ofthe MIIB work appears to be the need for a general strategy for safety management within the business. Although many strategies exist, of which few may even details the IEC 61*511- or API RP 2350,' a systematic advancement should be applied for determining the suitable SIL to be gathered by the protective systems. (Bond, 2005 p. 5921-5926) Safety standards In 2003, regarding safety instrumented systems (SlSs) for the procedure industry segment was published. The aim of this standard was to create a single set of needs addressing the whole SIS life cycle for the course industries. It gives this industry with a same methodology in the part of functional safety, together with guidance for formative the needed SILs. In the late 1990s, IEC 61508'' was released. (Bond, 2005 p. 5921-5926) This standard makes out a generic thought for all safety life cycle behaviors for systems consisted of electrical or programmable electronic equipments that are used to execute safety tasks. A major aim for this standard was to make the possible growing application-sector standards like IEC 61511. (Bond, 2005 p. 5921-5926) Using automatic tank weighs as overfill protection A mechanical tank gauge (ATC ;) can be used in various different ways relying on the application needs. By gauging level, pressure, temperature and other amounts, it is frequently used for operational power, ranging control or protection transfer when linked to a tank gauging system. In many conditions, radar-based ATGs are also elements of the safety planning of the tank ranch as an overfill safety. This is understood by having the ATG associated as the high (H) or high-high (HH) alarm button, or at times as an enhancement to other present alarms. (Bond, 2005 p. 5921-5926) Hard design requirements When used as an overfill safety, it is normally needed that the ATG has results both for the normal bus communication and results that can be integrated in a safety loop apart from the tank measuring system. However, hard design requirements should be considered by ATGs having this trait where the ATG exclusively is measured as an overfill safety device spotlighting on the safety job only. Proven-in-use equipment Regarding the SIS plan and engineering, section 11.5.3 of IEC 61511 offers the end user the opportunity of choosing sensors based on previous use if appropriate proof is available. In tank gauging plans where the overfill safety has to meet SIL 2 protection function requirements, one alternative is to utilize a state-of-the-art ATG confirmed to meet the values. A hardware evaluation with proven-in-use reflection according to IEC 61508/IEC 61511 counting an FMEDA outcoming in an SFF of more than 80.5% and 86.5% by means of one or two dispatches in series, respectively. (Bond, 2005 p. 5921-5926) Continuous confirmation Unless an original emergency situation happens, the HH alarm is in no way used between the verification test intervals. Thus, one can only be certain a predictable HH alarm switch works at the real moment when it is being experienced. Compared to automatic HH switches that are only checked and used on definite occasions, the standing of a radar-based ATG is incessantly watched in between the proof test gaps when linked to a tank gauging system. (Dowell, 2009 p. 6) The benefit of an ATG is that it gives the worker continuous knowledge about status and presentation, since it is being utilised in the daily operations in the tank farm. However, it is vital to understand that automatic ATGs do not appear to split the same benefit in terms of diagnostics. The very truth they are automatic and rely on heartrending parts means they give the impression more susceptible to a number of possible failure forms, as was mentioned in one of the MIIB information. (Dowell, 2009 p. 6) A good reason for decision Although the choice on the applying of proven-in-use procedures is all the time with the end user, an evaluation provides a good reason for a decision in agreement with section 11.5.3 of IEC 61511. (Dowell, 2009 p. 6) Thus, an improvement of the tank gauging tool is a very cost-efficient way of increasing tank farm protection. Why Radar Dominates the Market In the past, automatic ATGs were the leading technology in tank gauging functions. The drift technology that conquered the market in the 1950s was restored by servo technology in the 1970s. (Dowell, 2009 p. 6) However, from 1985, radar equipment has added market share each year and is currently the most general measuring technique. (Dowell, 2009 p. 6) Although radar leads the market, there are many automatic gauges around the planet still in process. The ending from the Buncefield incident can be further included to the list of causes to spend in state-of-the-art tank gauging utensils based on radar machinery. Gauge emulation for cost-competent retrofit Most previous tank gauging tools in service persist of automatic level gauges based on drift or servo technology. It is not rare that users believe the very high preservation costs, poor performance and untrustworthy dimensions associated with these, in its place of replacing them for contemporary radar-based ATGs. There are numerous causes for this. One cause is the high charge of replacing the whole system, which is measured a main project entailing a large budget. However, it is probable to upgrade automatic gauges to electronic gauges inside the same bus system. Emulation means that an obtainable mechanical ATG set up on a tank can be restored with another completely different kind of ATG stand on radar technology. After this substitute, the obtainable tank gauging system will not distinguish any difference between the following ATG and the previous Al Gs in the system. Although there are a little aspects to believe with this change-over, emulation has been worn for many years and some contemporary ATGs are prepared for this. Hence, emulation proposes step-by-step improvement of old automatic ATGs in a tank farm, making the newest features of modern ATGs obtainable in a very cost competent way. As instance of the safety suggestions, fire safe shut-off valves must be fixed close to the tank on together inlet and outlet pipes, whereas distantly activated shut-off' valves for the emergency segregation of hazardous materials should failsafe. Under repression measures, bund dual must be able of resisting fire, while tertiary restraint measures must be proficient of preventing the abandoned escape of firewater into the surroundings. References Bond, T. C., and H. Sun. (2005). Can reducing black carbon emissions counteract global warming? Environmental Science and Technology 39:5921-5926. Boyce, Paul. (2008). Asking for trouble at that speed. Professional Engineering, Vol. 21 Issue 20, p16-16. Dowell, Katy. (2009). Total toils in attempt to share Buncefield rap. Lawyer, Vol. 23 Issue 13, p6-6. Williams, T. C., C. R. Shaddix, K. A. Jensen and J. M. Suo-Anttila. (2007). Measurement of the dimensionless extinction coefficient of soot within laminar diffusion flames. International Journal of Heat and Mass Transfer 50: 1616-1630. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Construction Technology of the Buncefield Compound Case Study, n.d.)
Construction Technology of the Buncefield Compound Case Study. https://studentshare.org/engineering-and-construction/2044341-construction-technology
(Construction Technology of the Buncefield Compound Case Study)
Construction Technology of the Buncefield Compound Case Study. https://studentshare.org/engineering-and-construction/2044341-construction-technology.
“Construction Technology of the Buncefield Compound Case Study”. https://studentshare.org/engineering-and-construction/2044341-construction-technology.
  • Cited: 0 times

CHECK THESE SAMPLES OF Construction Technology of the Buncefield Compound

Technology and Structures

A compound thermal-insulation system is designed for the faade.... Since technology has brought a revolution in every field, architecture has also used it intelligently to gain immense benefit.... Internet, Computers and information technology is widely used is this field.... ement used in construction is characterized as hydraulic or non-hydraulic.... ydraulic mortars for masonry construction of harbor works, etc....
4 Pages (1000 words) Assignment

Compound Interest

You have $12,000 that you plan to invest in a compound-interest bearing interest.... At 46 years old, Willie figures he would like Topic: compound Interest compound Interest - Instructor Graded ProjectYou must show your work on all problems.... What is the compound interest earned?... (5 points)compound interest=FV-PV8511.... You have $12,000 that you plan to invest in a compound-interest bearing interest....
1 Pages (250 words) Assignment

Construction Technology, Services and Materials

Fired bricks are tested for strength before allowed on construction site.... Clay products used in construction of structures to support heavy loads need thorough testing.... They are the oldest and most durable building materials for mankind.... The clay materials used are compounds of alumina, silica mixed with small amounts of lime, magnesium or potash… Moulded clay bricks are put into a kiln and temperature is set between one thousand to slightly above two thousand degree Celsius....
6 Pages (1500 words) Assignment

Volatile organic compounds/ soot hair spray

According to the Solvents Emissions Directive, VOCs are “any organic compound having at 20 °C a vapor pressure of 0.... Volatile organic compound emissions from elephant grass and bamboo cultivars used as potential bioethanol crop.... Volatile organic compounds (VOC) are hazardous air pollutants that include aerosols, asbestos, carbon monoxide released from gas fumes, dust gas fumes, paints, soot, and other resultant compounds such as decane, heptane, ethylbenzene and nonane (Gibson et al 5)....
2 Pages (500 words) Essay

Decomposition of Ammonium Compound

One of them is the decomposition of the ammonium compound into its respective initial compounds that were used to form it.... Hydrochloric acid Decomposition of ammonium compound Ammonium compounds are identified by an ammonium ion in their composition.... One of them is the decomposition of ammonium compound into its respective initial compounds that were used to form it.... However, exposing bulk ammonium nitrate to fire may result in an explosive thermal decomposition of this compound to various products, including the toxic nitrogen dioxide (Meyer, 2010)....
2 Pages (500 words) Essay

Mineral Spirits Poisoning in New York Times

This compound has fumes that are readily inhaled by an individual when using CHEMICAL compound Mineral spirits are chemical compounds that have hydrocarbons and are in liquid form.... This compound has fumes that are readily inhaled by an individual when using the mineral spirit for various issues and this may amount to poisoning .... he severity of exposure to this compound is evident in its symptomatic respiratory challenge, headache, and irritation of the skin....
1 Pages (250 words) Essay

Volatile organic Compounds

The major effects of the compound on human health are in the central nervous system.... I used the gas chromatography electron capture detector method so that I could determine the levels of chlorinated compounds in the water.... From the test carried… The levels were determined to be 0....
1 Pages (250 words) Lab Report

Simple and Compound Interest

This paper “Simple and compound Interest” looks at the differences between the two basic interest types: Simple Interest and compound Interest.... Below is the formula utilized in calculating interest owed in simple interest: compound interest is interest expressed as a percentage of the revised principle.... nbsp; In other words, compound interest may be referred to as interest added to the principal amount of a loan or deposit in order for the interest added to also earn interest onwards....
4 Pages (1000 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us