StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

How to use a Gold in Wind Turbines - Essay Example

Cite this document
Summary
10 April 2013 How to use gold in a Wind Turbine Abstract With the ever-rising cost of energy, it has become essential for people to use any available alternative sources of energy. Dependence on these alternatives has also been triggered by the depletion of fossil fuels…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER98.6% of users find it useful
How to use a Gold in Wind Turbines
Read Text Preview

Extract of sample "How to use a Gold in Wind Turbines"

Download file to see previous pages

This report focuses on wind turbines, their design and how they can be redesigned using gold in order to increase their efficiency. Introduction The use of wind turbines to harness wind power is not a new technology. It is a concept that has been in operation since as the 7th century. To date, the wind turbines have become a familiar picture with their purpose being simple: to harvest the energy possessed by wind. Wind turbines differ in size depending on the required amount of energy. All wind turbines are made up of 4 major parts; rotor blades, nacelle unit, base and tower ((Energy Center of Wisconsin 1).

However, due to the technological advancements, various changes are been made in the design and choice of components in an attempt to increase its efficiency. The following report explains how gold can be used in a wind turbine in order to increase its efficiency. Breakdown of the major parts of a wind turbine As stated earlier, wind turbines come in different sizes depending on the energy requirements. There are four crucial parts that are essential in any wind turbine. These are rotor blades, nacelle, support tower and the foundation/base as shown in the following figure.

Figure 1: The major components of a wind turbine system (Alternative energy eMagazine 7) 1. . Rotation of the blades makes the turbine rotate thus capturing the kinetic energy contained in the wind (Energy Center of Wisconsin 2). 2. The Nacelle This part can be referred to as the ‘engine system’ of the wind turbine. It houses the generator and the gearbox that are connected to the rotor blades through a shaft and system of gears. The gears are used to increase the rotation speed of the blades.

Rotation of the blades results in rotation of the generator. The generator converts the kinetic energy possessed in the wind into electrical energy (Energy Center of Wisconsin 3). 3. Support Tower They are elevated a few feet from the ground and are used to hoist the rotor blades and the nacelle unit to heights where there is likely to be little barriers to wind motion. The most common design is a round steel cylinder. It also houses the electrical conduits and also contains a ladder running outside it to provide access to the rotor blades and nacelle unit for maintenance and repair services (Energy Center of Wisconsin 4). 4. Base/Foundation The base is constructed using concrete that is reinforced with steel bars.

The foundation holds the entire system in position thus is constructed with utmost caution. Choice of Materials for each component 1. Rotor Blades As stated earlier, the blades may be made from fiberglass, plastic, or metal. Regardless of the material used, the blades must be designed to capture the maximum surface area of the wind. They are also designed using a light weight material that is also durable and corrosion resistant. For this reason, most blades are made from reinforced plastic and fiberglass (Layton 5). 2. Nacelle unit In this unit, the major components are the generator and the gear box

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“How to use a Gold in Wind Turbines Essay Example | Topics and Well Written Essays - 1250 words”, n.d.)
How to use a Gold in Wind Turbines Essay Example | Topics and Well Written Essays - 1250 words. Retrieved from https://studentshare.org/engineering-and-construction/1473164-how-to-use-a-gold-in-wind-turbines
(How to Use a Gold in Wind Turbines Essay Example | Topics and Well Written Essays - 1250 Words)
How to Use a Gold in Wind Turbines Essay Example | Topics and Well Written Essays - 1250 Words. https://studentshare.org/engineering-and-construction/1473164-how-to-use-a-gold-in-wind-turbines.
“How to Use a Gold in Wind Turbines Essay Example | Topics and Well Written Essays - 1250 Words”, n.d. https://studentshare.org/engineering-and-construction/1473164-how-to-use-a-gold-in-wind-turbines.
  • Cited: 0 times

CHECK THESE SAMPLES OF How to use a Gold in Wind Turbines

Blowing In the Wind

This essay mostly focuses on the analysis of the wind turbines, that ties together the power of wind and utilize it to generate electricity.... hellip; The concept of wind turbines in the UK is not a new one.... Certain external environmental analysis based factors have revealed that there are some technological limitations which need to be corrected for the successful implementation of micro wind turbines in the market of Yorkshire.... In addition, cost of micro wind turbines is also affordable and favorable for the households of the country....
12 Pages (3000 words) Essay

Wind Technology and Electricity

The tapping of wind energy is normally and always a task that involves the use of wind turbines.... The nature and specifications of wind turbines differs from one type to another with regards to scope of production, the location of the turbines, the standards verified, and the policies that control the production and installation of the same.... The tapping of wind energy is normally and always a task that involves the use of wind turbines.... The nature and specifications of wind turbines differs from one type to another with regards to scope of production, the location of the turbines, the standards verified, and the policies that control the production and installation of the same....
25 Pages (6250 words) Research Paper

Hydropower versus Wind Turbine Generators in the Waikato

Wind power already provides some percentage of power into the grand power used in the Waikato Te Uku which is a wind power generating farm about 28 turbines and has produced a fairly high amount of power in watts.... Form the analysis of data collected, it became clear that wind power stand a better chance in the promotion of economic… Our study whose plan entailed; evaluation method development, data collection, assessment of power supply and needs, an interview with expert and analysis of power supply trends resulted in information which was used to It became evident from the research that wind turbine power generation will lead to low levels of pollution, reduced cost of power production and large amounts of power being generated to the national grid....
8 Pages (2000 words) Essay

Advantages and Disadvantages of Wind Turbines

Towers that have wind turbines, which are mounted on the top, capture it.... wind turbines that generate electricity are of two types basically, determined by the way in which they spin.... Most common are wind turbines that spin around a horizontal axis, the way a windmill does.... A wind vane is placed squire with blades (rotor) and is used to point small turbines, while large turbines make use of wind sensors, which is...
6 Pages (1500 words) Essay

Blade for a 10kW Horizontal Axis Wind Turbine

The author examines horizontal axis wind turbines which are placed on the top of a tower and they have a rotor shaft with an electric generator placed there.... here are mainly two types of wind turbines, based on the rotational axis of the turbine rotor.... Turbines rotating around a horizontal axis are called Horizontal axis wind turbines (HAWT) and those rotating around a vertical axis are named as vertical axis wind turbines (VAWT)....
10 Pages (2500 words) Term Paper

Improving the Efficiency of Wind Turbine Blades

Working parameters and changeability in the design of wind turbines are compared with vertical axis turbines (Dincer ET al.... "Improving the Efficiency of wind Turbine Blades" paper tries and finds out new methods of improving wind turbine efficiency by developing new surface material that increases the drag coefficient so that the fan blades can catch a lower speed of the wind.... wind energy is a clean and renewable energy source whose applications exist worldwide....
8 Pages (2000 words) Research Proposal

Wind Turbine in Cameroon

Cameroon needs to invest in wind turbines as one of its energy production and supply.... The "Wind Turbine in Cameroon" paper is aimed at broadly exploring methods used in designing wind turbines, their functions, and the side effects in relation to Cameroon.... As such, the country needs to invest in wind electricity production to supplement its production.... hellip; After assembling the blades, constructing the alternator, the last aspect is to create electrical connectivity during the operation of the wind turbine....
9 Pages (2250 words) Lab Report

Wind Energy Projects and Not-in-My-Backyard Syndrome

Engineers should develop offshore wind turbines that can produce renewable energy that can meet the expectations of the public.... However, the siting of wind turbines has become more challenging for wind developers, facility planners, and policymakers.... Reputable engineers are expected not just to follow the code of ethics but also to use it as a framework for deriving ethical standards based on their field of engineering.... hellip; Precaution can be taken by reducing the infrasound generated by turbines and improving the turbines' visibility....
10 Pages (2500 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us