Four Polymers from Which Hydrogels Can Be Made - Assignment Example

Summary

The author of the paper titled "Four Polymers from Which Hydrogels Can Be Made" lists the advantages and disadvantages of Polyvinyl Alcohol, Sodium Polyacrylate, Acrylate Polymers, and Copolymers in at least one different possible application for each hydrogel…

Download full paper File format: .doc, available for editing

GRAB THE BEST PAPER93.9% of users find it useful

Four Polymers from Which Hydrogels Can Be Made

Read Text Preview

Subject: Chemistry
Type: Assignment
Level: College
Pages: 1 (250 words)
Downloads: 2
Author: laurynlowe

Extract of sample "Four Polymers from Which Hydrogels Can Be Made"

It has no odor and is non-toxic to humans. It has excellent tensile strength and flexibility. It has high oxygen and aroma barrier properties. Its ability to absorb water increases its elongation and tearing strength. PVA is both degradable and soluble thus making it possible to be chemically decomposed to form intermediate products that are easier to dispose of (Gnanou & Fontanille 23).

Disadvantages: In the presence of moisture, its tensile strength decreases because water acts as a plasticizer. Uses: Polyvinyl Alcohol is used in making other polymers such as Polyvinyl Butyral. These polymers can be used in making safety glasses such as windshields for vehicles.

Disadvantage: If not disposed of properly, it will lead to contamination of water sources and soil.Application: The surfactants in detergents, found in Sodium Polyacrylate are efficient in binding hard water elements such as calcium and magnesium making them a choice Sequestering agent in detergents. Sodium polyacrylate is also used in making diapers and some brands of sanitary towels owing to their super absorbent ability (Gnanou & Fontanille 34).Acrylate Polymers:Advantages: Easily form polymers because they have highly reactive double bonds.

Disadvantages: They are non-biodegradable hence improper use can easily lead to environmental pollution.Application: Acrylate Polymer is used as a poisonous defense against marine phytoplankton protozoa (Gnanou & Fontanille 34).Copolymers:Advantages: They have a thermoplastic ability that makes it possible for them to be processed as a melt at high temperatures. They have the elastomeric ability. This enables it to regain its original shape even after stretching (Gnanou & Fontanille 44).Disadvantages: Burning Copolymers that have additives may cause the release of toxic gases into the atmosphere hence pollution. Uses: Copolymers are used in surgery to make scaffolds used for tissue repair and to make breast implants.

Cite this document

APA
MLA
CHICAGO

(“List the four polymers from which hydrogels can be made, and, for each Assignment”, n.d.)
List the four polymers from which hydrogels can be made, and, for each Assignment. Retrieved from https://studentshare.org/chemistry/1591350-list-the-four-polymers-from-which-hydrogels-can-be-made-and-for-each-one-list-the-advantages-and-disadvantages-of-eachat-least-one-different-possible-application-for-each-hydrogel

(List the Four Polymers from Which Hydrogels Can Be Made, And, for Each Assignment)
List the Four Polymers from Which Hydrogels Can Be Made, And, for Each Assignment. https://studentshare.org/chemistry/1591350-list-the-four-polymers-from-which-hydrogels-can-be-made-and-for-each-one-list-the-advantages-and-disadvantages-of-eachat-least-one-different-possible-application-for-each-hydrogel.

“List the Four Polymers from Which Hydrogels Can Be Made, And, for Each Assignment”, n.d. https://studentshare.org/chemistry/1591350-list-the-four-polymers-from-which-hydrogels-can-be-made-and-for-each-one-list-the-advantages-and-disadvantages-of-eachat-least-one-different-possible-application-for-each-hydrogel.

Cited: 0 times

CHECK THESE SAMPLES OF Four Polymers from Which Hydrogels Can Be Made

Polymers in Modern Life

he cycle can be reversed by cooling the materials.... Thermoplastic elements usually can be semi-crystalline structures or amorphous structures.... hermosetting polymers can be used in two separate ways firstly as a composite that is when combined with fibrous materials and secondly when as an adhesive and may be as epoxies.... The reaction can be performed at a normal room temperature or the application of either controlled heat or pressure....

6 Pages (1500 words) Essay

Supramolecular Polymer Based on Hydrogen Bonding

One of the main features of such polymers is low, controllable viscosity which can be adjusted through the introduction of monomeric units possessing the ability to interact with the chain stoppers.... In both cases two purification attempts were made, both unsuccessful.... The main purpose of the work was to isolate small receptor molecules which contained AADD hydrogen bonding in their structure.... First of all, 2-(4-(3-(3,5-bis(trifluoromethyl)phenyl)ureido)phenyl)acetic acid and 4-(4-(3-(3,5-bis (trifluoromethyl)phenyl)ureido)phenyl)butanoic acid contained impurities which were impossible to remove using recrystallization....

8 Pages (2000 words) Essay

Polymerization

The Tg can be decreased through an increase in the reaction temperature.... This is easy to achieve because regulation of temperature can be achieved easily.... The polymerization rate is also very strongly influenced by the size of the monomer side reactions which are of importance to the Tg of the copolymers....

10 Pages (2500 words) Coursework

How the Structures of Starch, Glycogen, and Cellulose Enable Them to Perform Their Function

This is because the aldehydo group that is present can be oxidized to form a carboxylic acid group, or in the presence of a base, a carboxylate ion group.... Carbohydrates that contain aldehydes or a-hydroxymethyl ketones can be oxidized by Cu(II) ion and are classified as reducing sugars.... Animals can hydrolyze this polymer to obtain glucose.... nother characteristic of monosaccharides is that they can act as mild reducing agents....

4 Pages (1000 words) Essay

Usage of Hydrogels, Solution Polymerization

The hydrogels synthesized can be made pH-sensitive or temperature-sensitive as required by incorporating methacrylic acid or N-isopropylacrylamide [4] as monomers.... A hydrogel construction can be described as a three-dimensional jetty made up of linear polymer chains with covalent connections, which are in turn connected by further cross-connections.... his solution crosslinking method is often advantageous since the starting material used can be a well-characterized, purified polymer, and the crosslinking conditions required are mild enough to be carried out in the presence of an active agent....

9 Pages (2250 words) Term Paper

Hydrogels Polymers

or example, polymers can be mixed to derive a very effective hydrogen cornerstone There has been a lot of res DNA however; one of the most important a breakthrough in the researches that involve DNA is the use of DNA functionalized Hydrogels to make biosensors.... They swell in waters and can absorb a large volume of water; this can only be compared to a couple of times the volume of dried gel.... hey can also be very important in immobilizing optical sensors because they have a very important property....

8 Pages (2000 words) Essay

Proton Exchange Membrane Materials for Fuel Cells

For instance, it has been found this can go up to 60% efficiency under favorable conditions (Vishnyakov, 2006).... Hence, proton exchange membrane fuel cells can become useful in electricity power generation more than hydroelectric power or thermal power generation.... However, low-temperature PEM fuel cells have various disadvantages, and which in the end reduce the efficiency of the membrane.... Ballard Power Systems which is a Canadian firm supports the PEMFC technique for Benz and Ford on their electro mobile cars....

13 Pages (3250 words) Annotated Bibliography

Hindered Amine Light Stabilisers

riacetoamine is the founding compound from which all HALS products are synthesized.... Thus by 1974 the hindered amine light stabiliser HALS – 1, which is a derivative of tetramethylpiperidine became commercially available and began to be used as a light stabiliser for polymers.... The important active group in HALS is tetramethylpiperidine, which makes the synthesis of tetramethylpiperidine the first step in the synthesis of HALS.... The credit for finding a stable free radical with chemical properties that offered potential protection for plastics from UV light rays goes to Neiman and his fellow researchers, who in 1962 came up with the stable 2,2,6,6-tetramethyl-4-oxopiperidine-N-oxyl....

7 Pages (1750 words) Assignment