StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Fabrication of a Reinforced Concrete Beam - Lab Report Example

Cite this document
Summary
1. The Type R stands as a notation for Plain Round Grade 250 as reinforcing bar. Where as according to BS4449:2005 the other other types include H - Ribbed Grade 500 (this replaces T or Y from older standards) and S - Stainless Steel. These are used in a manner that if it is written R8 then this means that plain rounded bar of grade 250 and diameter of 8mm is to be used…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.1% of users find it useful
Fabrication of a Reinforced Concrete Beam
Read Text Preview

Extract of sample "Fabrication of a Reinforced Concrete Beam"

Download file to see previous pages

Thirdly this gives sufficient space for the main reinforcement to develop full stressing and strength, which consequently prevents slipping of the bars. Lastly a sufficient cover gives a smooth surface which improves the aesthetics of the component as well. 3. 4. Bar codes are on the schedule so that the reader must understand that how the steel bar is is to be bended and what angles and shapes are to be made. In addition to this the reader can easily calculate the length of the bar, and consequently by using the diameter and the type of bar the total weight of the bar can be calculated and finally the total weight of the reinforcement. 5. The cover can be maintained by different methods.

One method can be made by placing Metal plastic tipped bar chairs under the reinforcement so that a specified height can be maintained between the bottom surface and reinforcement. Then another method is to give spacer blocks, these can be small marble pieces or concrete plates. Another method used for very heavy reinforcement is the employment of Plastic strip bar chairs. 6. a) coarse aggregate = 122.4 Kg b) fine aggregate = 81.6 Kg c) cement = 40 Kg d) water = 22 Kg 7. Water cement ratio of the concrete is (weight of water / weight of cement ) is w/c = 22/40 = 0.

55 SSD or saturated surface dry is a condition of the aggregate when all the surface pores of aggregate are fully filled and there is no excess water on its surface. In addition no more water will be absorbed by the aggregate when immersed in water. This aspect is important because if the aggregate is not saturated then it will start absorbing the water of the concrete which was supposed to be consumed in the hydration of the concrete. If there is less water in the concrete than required the concrete will not acquire the desired strength and the concrete will have microscopic cracks further weakening the concrete and this will also disturb the desired water cement ratio.

Then this state helps in finding the absorption value of aggregates and also the specific gravity of aggregate. Lastly the aggregate must be saturated surface dry as the dry surface will help and ensure a good bond between the concrete and aggregate. 8. A clean beam form is important because presence of any loose material will attach on the surface of the beam and when the beam is subjected to bending the concrete around this loose material and the loose material it self will spall off. Hence the cover would be compromised and there is a chance that the steel reinforced will be naked and prone to environment resulting into its rusting and corrosion. 9. The indication of completion of the compaction is that the firstly there is no decrease/ decay in volume or height of the concrete and the movement of aggregates due to vibration in the concrete will very low.

In addition the final indication is that the water will come on the surface of the concrete and it must be noted that as soon as the water film appears on the surface of the concrete the vibrator must be pulled out of the concrete or else the concrete will segregate, resulting into separation of cement paste and aggregate. 10. The compaction of concrete is very important for its acquisition of desired strength, In essence compaction is the process in which the entrapped air is released from the

...Download file to see next pages Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Fabrication of a Reinforced Concrete Beam Lab Report”, n.d.)
Retrieved from https://studentshare.org/engineering-and-construction/1436539-fabrication-of-a-reinforced-concrete-beam
(Fabrication of a Reinforced Concrete Beam Lab Report)
https://studentshare.org/engineering-and-construction/1436539-fabrication-of-a-reinforced-concrete-beam.
“Fabrication of a Reinforced Concrete Beam Lab Report”, n.d. https://studentshare.org/engineering-and-construction/1436539-fabrication-of-a-reinforced-concrete-beam.
  • Cited: 0 times

CHECK THESE SAMPLES OF Fabrication of a Reinforced Concrete Beam

Building Development

The substructure is composed of bored piles with reinforced concrete pile caps directly supporting the basement level.... Internal partition is a drywall system utilizing plasterboard set on metal studs, either freestanding or as linings to reinforced concrete walls, and is fire rated as required.... hellip; The superstructure is a steel spaceframe building with a central concrete core housed under a curved steel roof.... Floors are constructed using a raised access system over a concrete slab reinforced by steel mesh....
8 Pages (2000 words) Case Study

Degradation of glass fibre

hellip; Research paper has shown that degradation of GFRP rebars embedded in concrete structures is affected by moisture uptake and elevated temperatures.... The use of Glass reinforced Polyester was not common until after World War II which saw the initial commercial use of the material/ composite being established (Telang, et al, 2006).... The fiber reinforced polymers are the highly recommended in civil engineering structures due to their durability in comparison to steel, cost effectiveness and with their enhanced properties....
30 Pages (7500 words) Coursework

Verify of Anchorage Length in Reinforced Concrete

The paper "Verify of Anchorage Length in reinforced concrete" highlights that the bond stress versus slip history as computed using the proposed model and as observed are compared for a series of specimens tested by a number of different researchers.... or reinforced concrete structures subjected to moderate loading, the bond stress capacity of the system exceeds the demand and there is relatively little movement between the reinforcing steel and the surrounding concrete....
13 Pages (3250 words) Coursework

Triborough Bridge Project

Finally, some steel sections of the bridge could be replaced with concrete reinforced with steel.... "Triborough Bridge Project" paper focuses on the modern reconstruction of the Triborough Bridge Project that focuses on reducing costs, increasing stability, and prolonging its life....
10 Pages (2500 words) Case Study

The Modification of Concrete Structures

he primary purpose of the experiment to perform an investigation to examine the theory linked with a mixed design of concrete and the design and analysis of reinforced concrete beams.... The deflection performance of the load on the RC beam predicted theoretical point of view were compared with the results, which were obtained, conclusions were drawn on the shortcomings of the established theory.... The paper "The Modification of concrete Structures" discusses that longitudinal cracks occurred below on the side plates and later developed into vertical cracks that extended up to the end of the plate....
7 Pages (1750 words) Lab Report

Steel and Concrete Construction Frames

"Steel and concrete Construction Frames" paper compares and contrasts steel and concrete frame construction as well as their structural design in normal and fire conditions.... This report discusses and analyses construction materials including concrete and steel.... nbsp; concrete and steel are the key building materials, especially in high-rise buildings.... Frame construction of both steel and concrete is the ideal solution that provides a structure with a flexible layout of the floor that is open as well as external elevations for continuous cladding and glazing....
20 Pages (5000 words) Term Paper

Timber Frame and Concrete Frames

Akin (2006, 56) shows that in order to overcome the weaknesses of concrete frames, engineers put steel bars in concrete to make reinforced concrete frames.... reinforced concrete is widely used in developing countries because it has a lower cost compared to steel.... reinforced concrete frames are commonly used in places where seismic risk is high such as Southeast Asia, Latin America, Southern Europe, the Middle East, and North Africa.... reinforced concrete frames are made of horizontal beams and vertical columns connected by firm joints....
6 Pages (1500 words) Literature review

Concrete Frame and Steel Frame Construction

The reinforced concrete structural frame allows partitions and framing to be built inside the frame by bolting them directly to solid concrete backing.... Moreover, column spacing in concrete is between 18 to 45 ft while the depth of the beam depends on this column spacing- the wider the column spacing the deeper the beams (Ambrose & Tripeny, 2010:182).... The thickness of the frame system in concrete construction is measured from the top of the slab while beam width is often similar to column width (Ambrose & Tripeny, 2010:184)....
10 Pages (2500 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us