StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Air-turbine performance - Coursework Example

Cite this document
Summary
A turbine is basically a rotational machine that extracts energy from a fluid stream and converts such energy into useful shaft or mechanical work through a work process. Normally during the conversion process, the pressure of the fluid falls. However, if the fluid stream is a…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER97.1% of users find it useful
Air-turbine performance
Read Text Preview

Extract of sample "Air-turbine performance"

Download file to see previous pages

Firstly, the turbine may experience some heating for the atmosphere and if it operates at a temperature less than that of the atmosphere, the heating process will result to a transfer of energy to the turbine hence an increase in the shaft work output. Secondly, the turbine may experience effects of friction from either the air-stream or shaft bearings and this will lead to a reduction to the shaft work output. The magnitude of these two heating processes are rather difficult to measure hence for the purpose of this experiment, such effects will be noted so as to help in explaining the trends of the measurements obtained.

The diagram below shows a schematic arrangement of an air-turbine A high pressure from station 1 passes through a turbine and is exhausted at station 2 under a low pressure. Consequently, temperature T1 at station 1 falls to T2 at station 2 and these are measured using a thermocouple. Due to energy extraction, shaft work Wx is produced and this can be measured by use of brake-dynamometer. Therefore, in the plot of a graph of Wx against Cp (T2 -T1), any deviation from a straight line gradient passing through the origin will be attributed to factor - Wf + Q hence an evaluation of these two terms may result in either a negative, positive or zero value.

Theoretically, the rotational speed of the turbine is expected to vary. Also the percentage of the energy extracted from the air stream that is converted to useful shaft will vary with the rotational speed and will reach an optimum at the design speed of the turbine. d) The turbine speed was measure through the help of the tachometer once the turbine speed and inlet and outlet temperatures had stabilized. This speed values were recorded alongside the values of T2 and T1. The two graphs are nearly straight line graphs but with a negative gradient. However,

...Download file to see next pages Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Air-turbine performance Coursework Example | Topics and Well Written Essays - 1250 words”, n.d.)
Air-turbine performance Coursework Example | Topics and Well Written Essays - 1250 words. Retrieved from https://studentshare.org/engineering-and-construction/1632912-air-turbine-performance
(Air-Turbine Performance Coursework Example | Topics and Well Written Essays - 1250 Words)
Air-Turbine Performance Coursework Example | Topics and Well Written Essays - 1250 Words. https://studentshare.org/engineering-and-construction/1632912-air-turbine-performance.
“Air-Turbine Performance Coursework Example | Topics and Well Written Essays - 1250 Words”, n.d. https://studentshare.org/engineering-and-construction/1632912-air-turbine-performance.
  • Cited: 0 times

CHECK THESE SAMPLES OF Air-turbine performance

The Jet Engine Analysis

They make use of force produced by thrusts within the engine.... This force allows a plane to fly at a very high speed.... These engines are also referred to as the gas turbines.... Gas turbines are a combination of all jet… The component parts of the jet engine allows for the study of its functionality based on the very specific parts that are brought together to make up the engine....
9 Pages (2250 words) Research Paper

Rebort asimant

Jet engine is made up of the compressor,… Compressor is used for adiabatic compression, the combustion chamber is used to add heat to air at constant pressure, the turbine is used for adiabatic expansion; take work from the air and use it in running the compressor, the nozzle The aim of the experiment is to understand the operation and performance of the jet engine....
6 Pages (1500 words) Research Paper

Gas Turbine Engine Basics

The compressor is designed to direct intake air into the combustion chamber at a high velocity, while the combustion chamber is equipped with the fuel nozzles and… The expanding gases are used to turn the turbine, which helps to keep the engine in operation as it drives the compressor through the shaft (FOPPGS 1)....
8 Pages (2000 words) Coursework

Gas Turbine Engine Compressors - Comparison

It is comprised of a rotating compressor, a combustion chamber and turbine.... The compressor takes in the air at normal pressures and compresses it to higher pressures (Carl, 2002).... This paper seeks to elaborate on… The paper also seeks to explore recent advances that have occurred in the design of gas turbine compressors. A centrifugal compressor is a rotodynamic Its working fluid is air....
5 Pages (1250 words) Essay

Turbine Engine Classification, Benefits and Application

The turbine engine has a number of advantages which include its increased aircraft performance, reliability, less vibration.... Optimum propeller performance which is achieved at low speeds is brought about by the reduction gear.... The objective of the following research "Turbine Engine Classification, Benefits and Application" is to provide a description of the principles of the construction of turbine engines as well as its types, discuss the general process of its work and investigate its advantages over analogs....
4 Pages (1000 words) Research Paper

Aircraft Gas Turbine Blade

This work called "Aircraft Gas Turbine Blade" describes the functions of the gas turbine blades in the jet engine with the specialized nature of the engine coming into focus.... From this work, it is clear the quenching process makes the metal resistant to plastic deformation and resistant to wear....
8 Pages (2000 words) Coursework

Theory of Operation and Performance of Turbine Engines

In the report “Theory of Operation and performance of Turbine Engines,” the author tries to understand the main theoretical concept that defines the performance and operation of the turbine engines.... There are several forces involved in the operation and performance.... Theory of Operation and performance of Turbine EnginesUnderstanding how the turbines engine works forms the main theoretical concept that defines the performance and operation the turbine engines....
2 Pages (500 words) Book Report/Review

Vertical Axis Wind Turbine

Under analysis the advantages and disadvantages of VAWT have been discussed and also the cost and performance have been addressed.... Some of the features that make VAWT superior are It has significant aerodynamic performance improvement that makes use of large vertical blade configurations which are mounted on the vertical axis so as to derive more energy from the wind VAWT are described as being omnidirectional and thus they are able to make full use of wind power with a direction not being a hindrance Through the incorporation of aerodynamic load controls, there is braking in high winds with computerization there can be a simple operation that involves integration with the Smart Grid Manager control system to enable operation, management, and monitoring to be done remotely....
6 Pages (1500 words) Case Study
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us